hello world!

Moldy Walls and Floors: What to Do

Mold is a problem that can affect any home. It often appears as black or green patches on walls, floors and other surfaces in your house - difficult to remove without some professional help! In this blog post we will discuss the causes of moulding plus provide tips for preventing its formation from happening again- so read ahead if you want answers about how best to deal with these situations yourself...


Identify the source of moisture to avoid future problems

Mould often grows due a lack in water, so you'll need to determine where your leaky roof or wall is. common sources for this type of problem include flooding, condensation from wet carpets, etc., once found, then take action quickly before it gets worse!

Once you've identified the cause of your mould, there are many ways to fix it. For example, if a leak is what's causing all those black stains on ceiling fans then repairing that would be one solution! You can also try installing insulation or ventilation systems to reduce humidity levels where needed for optimal drying out efforts - this may help prevent future occurrences as well

Water damage should be repaired and the area should be dried out

Once you have isolated the source of moisture, it's time for some repairs. You'll need to clean affected surfaces and replace any damaged materials in order to make sure your house isn't smelling like a wet dog all day long! Make sure that everything is thoroughly dry before moving on with step two- this won’t do anyone any good if there are still traces left behind after cleaning procedures have been completed.

Getting rid of mold

This recipe for removing mold will stop it in its tracks and leave you with a clean, dry surface. Simply mix one part bleach into three parts water in your affected area using either brush or cloth application-the key here is speed! Apply as quickly as possible before any more damage can occur. Let it sit for approximately 30 minutes before removing the mould. Once you have removed as much as possible, rinse the area with clean water.

Avoid a repeat of mold infestation

It is important to take precautions once you have removed the mould. You may want to prevent its return by fixing any leaks or moisture problems, increasing ventilation in your home with more air flow for better drying rates and using products that are safe against future infections like fungal spores.

Mold can be pesky but there's no need worry because we've got all these steps covered!

Continue to monitor the area for signs of mold

If you've dealt with the mould, make sure to monitor your surroundings for any new patches. If they appear again and can't be removed immediately then take the steps right away! Keep this in mind so that no more of those pesky fungus grow on top of each other in places where it doesn’t belong like inside homes or buildings

Mold is something most people would rather not have around; but if we keep our guard up by taking care during its growth phase.


Mould is a very common problem that can affect any home. It often appears as black or green patches on walls, floors and ceilings-and it's difficult to get rid of! In this blog post we've discussed the causes for those molds growing in your house (or even outside) along with some methods on how you could deal them without having too much trouble doing so yourself if possible. By following these steps, you can keep your home free of mould for good!

Site Safe Member
Restoration Industry Association
safety work kits
iDry Restoration Logo
8/251 Lincoln Rd, Henderson, Auckland
Get in touch with us for free quote
Get Quote
Flood Restoration
Fire Restoration
Mould Removal
iDry Logo white500
369 Great North Road, Henderson, Auckland 
Get in touch with us for free quote
Get Quote
Copyright © 2019 - 2021 iDry Restorations. All Rights Reserved.
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram